CAPTCHA IMAGE

Documents & Guides

Documents & Guides

  • General Documents
  • TCs GUIDELINES
  • QMS GUIDELINES
  • LEGAL METROLOGY

General Documents

Guideline for Approval of Gulf Measurement Standards

Reference Number : BD-091004-02

The purpose of this guide is to identify the requirements for the selection, adoption, use and keep of GCC measurement standards used in the calibration of national measurement standards of the GCC countries or used in interlaboratory comparison programs organized by the GCC Standardization Organiza...

Guideline for Approval of Gulf Measurement Standards

Dismiss

  • Approved On :
  • Approved By :
Guideline for Technical Assistance

Reference Number : TC-164009-01

The aim of the initiative is to provide Pathway to develop metrological technical capabilities in the GULFMET member states by providing technical assistance in accordance with this guide. ...

Guideline for Technical Assistance

Dismiss

  • Approved On :
  • Approved By :

TCs GUIDELINES

Registration Procedure For GULFMET Comparisons

Reference Number : TC‐122507‐02

This procedure applies to past, present and planned multilateral or bilateral, key or Supplementary comparisons or pilot studies that have been initiated, organized and reviewed by a GULFMET technical committee (TC) or Working Group. (WG) ...

Registration Procedure For GULFMET Comparisons

Dismiss

  • Approved On :
  • Approved By :
GULFMET TCs Guide - Technical work procedures

Reference Number : TC-153604-01

...

GULFMET TCs Guide - Technical work procedures

Dismiss

  • Approved On :
  • Approved By :
Procedure for Review of CMCs

Reference Number : TC-122507-03

The GULFMET review process will consist of three parts, a technical review, a quality system review, and a final coordinating review by the Technical Committee (TC). ...

Procedure for Review of CMCs

Dismiss

  • Approved On :
  • Approved By :
Guidelines on Conduction Comparisons

Reference Number : TC‐122507‐01

This document gives practical guidelines for comparisons within the framework of GULFMET in addition to the Technical Supplement to the Mutual Recognition Arrangement (MRA), for the recognition of national measurement standards and of calibration and measurement certificates issued by National Metro...

Guidelines on Conduction Comparisons

Dismiss

  • Approved On :
  • Approved By :

QMS GUIDELINES

TC QS Guide - Technical work procedures

Reference Number : TC-153604-02

Based on the recommendations of GULFMET assembly in its second meeting held in Dubai on September 26, 2011; which included the recommendation to form a committee for Quality in Metrology under the umbrella of GULFMET, the Technical Council has approved in its twenty-fourth meeting (Riyadh October 27...

TC QS Guide - Technical work procedures

Dismiss

  • Approved On :
  • Approved By :
Guideline for initial QMS presentation

Reference Number : TC-143404-02

This guideline for the Technical Committee for Quality in Metrology (TC-Quality) is applicable for National Metrology Institutes (NMIs) and Designated Institutes (DIs) who have not yet presented their Quality Management System (QMS) to TC-Quality. ...

Guideline for initial QMS presentation

Dismiss

  • Approved On :
  • Approved By :
Guideline for QMS Annual Report

Reference Number : TC-133007-01

The purpose of the annual report is to provide information about the main changes to the QMS and QMS life for the period under consideration. Information should be brief, but should include the main points and be clearly understandable. Lists and figures should be in English. Acronyms should be avoi...

Guideline for QMS Annual Report

Dismiss

  • Approved On :
  • Approved By :
Guideline for QMS Re-evaluation Presentation

Reference Number : TC-133007-02

This TC- QUALITY guideline is applicable for National Metrology Institutes (NMIs) and Designated Institutes (DIs) who have to present their Quality Management System (QMS) for re-evaluation within TC- QUALITY. ...

Guideline for QMS Re-evaluation Presentation

Dismiss

  • Approved On :
  • Approved By :
Quality Management System review procedure

Reference Number : TC-122809-02

This document specifies the procedure for reviewing the quality management systems (QMSs) of GULFMET National Metrology Institutes (NMI) and Designated Institutes (DIs) within the framework of the review of calibration and measurement capabilities (CMCs) declared by GULFMET Member NMIs and DIs. ...

Quality Management System review procedure

Dismiss

  • Approved On :
  • Approved By :
Guide for on-site visits by peers in the frame work of CIPM MRA

Reference Number : TC-122809-04

This guide is developed with the purpose of having an agreed method to conduct formal on-site visits by peers, clearly laying down the objectives, requirements for development and documentation of the findings and for reporting the review outcomes. ...

Guide for on-site visits by peers in the frame work of CIPM MRA

Dismiss

  • Approved On :
  • Approved By :

LEGAL METROLOGY

GCC Common Metrology Law (AR)

Reference Number : BD-101306

The aim of the Law is to ensure that the measurements made at the level of Member States increase confidence in the results of testing and calibration and pave the way for mutual international recognition. ...

GCC Common Metrology Law (AR)

Dismiss

  • Approved On :
  • Approved By :
Guideline for Metrological Control of Prepackaged Products

Reference Number : BD-091004-04

The purpose of this guide is to identify the requirements to be achieved in prepackaged containers in order to prevent cheating and fraud. ...

Guideline for Metrological Control of Prepackaged Products

Dismiss

  • Approved On :
  • Approved By :
Guideline of entitling Verification bodies

Reference Number : TC-143207-01

The objective of this guide is to identify the requirements and procedures related to the authorization of the verification bodies of measuring Instruments subject to metrological control. ...

Guideline of entitling Verification bodies

Dismiss

  • Approved On :
  • Approved By :
Guideline for Type Approval

Reference Number : BD-091004-03

The objective of this Guideline is to identify the steps to evaluate and approve the type according to the mandatory requirements of the instrument ...

Guideline for Type Approval

Dismiss

  • Approved On :
  • Approved By :
Guideline of Metrological control

Reference Number : BD- 091104-01

This guide aims to regulate the supervision and metrological supervision exercised on the measurements in respect of the exploitation, installation, use, maintenance, repair and / or in respect of their use or performance in order to verify that they are used properly and in accordance with the laws...

Guideline of Metrological control

Dismiss

  • Approved On :
  • Approved By :
Guideline of Metrological Control of CRM

Reference Number : TC-122807-01

The aim of this mechanism is to determine the procedures for metrological control of reference materials registered in national authorities of GSO member states . ...

Guideline of Metrological Control of CRM

Dismiss

  • Approved On :
  • Approved By :

Join our newsletter and keep updated

Subscribe to our newsletter for latest updates and news from GULFMET