CAPTCHA IMAGE

Documents & Guides

Documents & Guides

  • General Documents
  • TCs Guides
  • QMS Guides
  • Legal Metrology
  • Processes & Procedures
  • Forms

General Documents

GULFMET Strategy

Reference Number : GULFMET GA 2021

GULFMET Strategy 2022-2025 ...

GULFMET Strategy

Dismiss

  • Approved On :
  • Approved By :
GULFMET Procedure for electing TC chair and Secretary

Reference Number :

This procedure determines the steps that have been followed for electing the TC chair and secretary. ...

GULFMET Procedure for electing TC chair and Secretary

Dismiss

GULFMET TC Chairs & Secretaries Leader framework

Reference Number :

The GULFMET Secretariat held during the online GULFMET week event (06-10 June 2021) the elections for the GULFMET TC Chairs and Secretaries whose term has expired, based on the Guideline for the Work of the GULFMET TCs and the procedure for electing the Chairs and Secretaries. For the tasks to be...

GULFMET TC Chairs & Secretaries Leader framework

Dismiss

  • Approved On :
  • Approved By :
GULFMET Organizational Structure

Reference Number : MC-210208-01

GULFMET, is a Regional Metrology Organization (RMO) established under the auspices of GCC Standardization Organization (GSO), bringing together National Metrology Institutes (NMIs) of the United Arab Emirates, Kingdom of Bahrain, Kingdom of Saudi Arabia, Sultanate of Oman, State of Qatar and...

GULFMET Organizational Structure

Dismiss

  • Approved On :
  • Approved By :
Guideline for Technical Assistance

Reference Number : TC-164009-01

The aim of the initiative is to provide Pathway to develop metrological technical capabilities in the GULFMET member states by providing technical assistance in accordance with this guide. ...

Guideline for Technical Assistance

Dismiss

  • Approved On :
  • Approved By :
Guideline for Approval of Gulf Measurement Standards

Reference Number : BD-091004-02

The purpose of this guide is to identify the requirements for the selection, adoption, use and keep of GCC measurement standards used in the calibration of national measurement standards of the GCC countries or used in interlaboratory comparison programs organized by the GCC Standardization Organiza...

Guideline for Approval of Gulf Measurement Standards

Dismiss

  • Approved On :
  • Approved By :

TCs Guides

Registration Procedure For GULFMET Comparisons

Reference Number : TC‐122507‐02

This procedure applies to past, present and planned multilateral or bilateral, key or Supplementary comparisons or pilot studies that have been initiated, organized and reviewed by a GULFMET technical committee (TC) or Working Group. (WG) ...

Registration Procedure For GULFMET Comparisons

Dismiss

  • Approved On :
  • Approved By :
GULFMET TCs Guide - Technical work procedures

Reference Number : TC-153604-01

Based on the recommendations of the GULFMET at its third meeting held in Dubai on 19 March 2012, which included the mandate of the GULFMT Secretariat to redefine the functions and role of the technical committees (TCs) according to the latest developments, the GULFMET renamed the technical metrologi...

GULFMET TCs Guide - Technical work procedures

Dismiss

  • Approved On :
  • Approved By :
Procedure for Review of CMCs

Reference Number : TC-204405-04

The GULFMET review process will consist of three parts, a technical review, a quality system review, and a final coordinating review by the Technical Committee (TC). ...

Procedure for Review of CMCs

Dismiss

  • Approved On :
  • Approved By :
Guidelines on Conduction Comparisons

Reference Number : TC‐122507‐01

This document gives practical guidelines for comparisons within the framework of GULFMET in addition to the Technical Supplement to the Mutual Recognition Arrangement (MRA), for the recognition of national measurement standards and of calibration and measurement certificates issued by National Metro...

Guidelines on Conduction Comparisons

Dismiss

  • Approved On :
  • Approved By :
GULFMET CMCs Submission Process

Reference Number :

The provisional status of GULFMET and the need for GULFMET NMIs to submit CMCs through another RMO requires special treatment because KCDB2.0 programming can’t handle these circumstances directly. The workflow for submissions from GULFMET is therefore required to include an intra-regional review to ...

GULFMET CMCs Submission Process

Dismiss

  • Approved On :
  • Approved By :

QMS Guides

TC QS Guide - Technical work procedures

Reference Number : TC-153604-02

Based on the recommendations of GULFMET assembly in its second meeting held in Dubai on September 26, 2011; which included the recommendation to form a committee for Quality in Metrology under the umbrella of GULFMET, the Technical Council has approved in its twenty-fourth meeting (Riyadh October 27...

TC QS Guide - Technical work procedures

Dismiss

  • Approved On :
  • Approved By :
Guideline for initial QMS presentation

Reference Number : MC-210205-05-03

This guideline for the Technical Committee for Quality in Metrology (TC-Quality) is applicable for National Metrology Institutes (NMIs) and Designated Institutes (DIs) who have not yet presented their Quality Management System (QMS) to TC-Quality. ...

Guideline for initial QMS presentation

Dismiss

  • Approved On :
  • Approved By :
Guideline for QMS Annual Report

Reference Number : MC-210205-05-04

The purpose of the annual report is to provide information about the main changes to the QMS and QMS life for the period under consideration. Information should be brief, but should include the main points and be clearly understandable. Lists and figures should be in English. Acronyms should be avoi...

Guideline for QMS Annual Report

Dismiss

  • Approved On :
  • Approved By :
Guideline for QMS Re-evaluation Presentation

Reference Number : TC-133007-02

This TC- QUALITY guideline is applicable for National Metrology Institutes (NMIs) and Designated Institutes (DIs) who have to present their Quality Management System (QMS) for re-evaluation within TC- QUALITY. ...

Guideline for QMS Re-evaluation Presentation

Dismiss

  • Approved On :
  • Approved By :
Quality Management System review procedure

Reference Number : MC-210205-05-01

This document specifies the procedure for reviewing the quality management systems (QMSs) of GULFMET National Metrology Institutes (NMI) and Designated Institutes (DIs) within the framework of the review of calibration and measurement capabilities (CMCs) declared by GULFMET Member NMIs and DIs. ...

Quality Management System review procedure

Dismiss

  • Approved On :
  • Approved By :
Guide for on-site visits by peers in the frame work of CIPM MRA

Reference Number : MC-210205-05-02

This guide is developed with the purpose of having an agreed method to conduct formal on-site visits by peers, clearly laying down the objectives, requirements for development and documentation of the findings and for reporting the review outcomes. ...

Guide for on-site visits by peers in the frame work of CIPM MRA

Dismiss

  • Approved On :
  • Approved By :

Legal Metrology

GCC Common Metrology Law (AR)

Reference Number : BD-101306

The aim of the Law is to ensure that the measurements made at the level of Member States increase confidence in the results of testing and calibration and pave the way for mutual international recognition. ...

GCC Common Metrology Law (AR)

Dismiss

  • Approved On :
  • Approved By :
GCC Type Approval Certification Scheme

Reference Number : TC-235406-07

...

GCC Type Approval Certification Scheme

Dismiss

  • Approved On :
  • Approved By :
Guideline for Metrological Control of Prepackaged Products

Reference Number : TC-235406-04

The purpose of this guide is to identify the requirements to be achieved in prepackaged containers in order to prevent cheating and fraud. ...

Guideline for Metrological Control of Prepackaged Products

Dismiss

  • Approved On :
  • Approved By :
Guideline of entitling Verification bodies

Reference Number : TC-235406-05

The objective of this guide is to identify the requirements and procedures related to the authorization of the verification bodies of measuring Instruments subject to metrological control. ...

Guideline of entitling Verification bodies

Dismiss

  • Approved On :
  • Approved By :
Guideline for Type Approval

Reference Number : TC-235406-06

The objective of this Guideline is to identify the steps to evaluate and approve the type according to the mandatory requirements of the instrument ...

Guideline for Type Approval

Dismiss

  • Approved On :
  • Approved By :
Guideline of Metrological control

Reference Number : BD- 091104-01

This guide aims to regulate the supervision and metrological supervision exercised on the measurements in respect of the exploitation, installation, use, maintenance, repair and / or in respect of their use or performance in order to verify that they are used properly and in accordance with the laws...

Guideline of Metrological control

Dismiss

  • Approved On :
  • Approved By :
Guideline of Metrological Control of CRM

Reference Number : TC-122807-01

The aim of this mechanism is to determine the procedures for metrological control of reference materials registered in national authorities of GSO member states . ...

Guideline of Metrological Control of CRM

Dismiss

  • Approved On :
  • Approved By :

Processes & Procedures

Technical Assistance Procedure

Reference Number : MD-OP-007-22

The GULFMET seeks to provide a path for the development of calibration and measurement capabilities of the GULFMET member states as a mechanism for these members to gain international recognition of calibration and measurement capabilities (CMCs). In this sense, GULFMET ...

Technical Assistance Procedure

Dismiss

  • Approved On :
  • Approved By :
Procedure for Joining GULFMET as Associate or Observer Member

Reference Number : MD-OP-003-22

...

Procedure for Joining GULFMET as Associate or Observer Member

Dismiss

  • Approved On :
  • Approved By :
Participation in Regional and International Events

Reference Number :

...

Participation in Regional and International Events

Dismiss

  • Approved On :
Appointment of GULFMET President

Reference Number :

...

Appointment of GULFMET President

Dismiss

  • Approved On :
GULFMET GA, SCM and TCs meeting procedures

Reference Number :

...

GULFMET GA, SCM and TCs meeting procedures

Dismiss

  • Approved On :
Signing MoU with GULFMET Process

Reference Number :

...

Signing MoU with GULFMET Process

Dismiss

  • Approved On :
CONTROL OF DOCUMENTS AND RECORDS PROCESS

Reference Number :

...

CONTROL OF DOCUMENTS AND RECORDS PROCESS

Dismiss

  • Approved On :
Election and assign TC chairs and secretaries precess

Reference Number :

...

Election and assign TC chairs and secretaries precess

Dismiss

  • Approved On :
Type Approval for Measuring Instruments Subject to Legal Control

Reference Number :

...

Type Approval for Measuring Instruments Subject to Legal Control

Dismiss

  • Approved On :

Forms

Sorry! There is no items to display.

Join our newsletter and keep updated

Subscribe to our newsletter for latest updates and news from GULFMET